the default template does not apply to the mod upload (Conversion)
on each upload the values are ignored also the rear tag
!! Lokaly everything works as expected !!
the default template does not apply to the mod upload (Conversion)
on each upload the values are ignored also the rear tag
!! Lokaly everything works as expected !!
i had the same problem, i just copied all the values over from the template
<Camera Center="(0; 0; 0)" ParentFrame="" RadiusMultiplier="1.1" >
<Cockpit
ViewDir="(1.0; -0.05; 0)"
ViewPos="(0; 0; 0)"
LimitsHor="(-2.8; 1.0)"
LimitsVer="(-0.32; 0.2)"
ZoomViewDirOffset="(0;-0.1;0)"
ZoomViewPosOffset="(0.4;0;0)"
>
<Rear
HorTransitionEnd="-1.5"
HorTransitionStart="-1.2"
LimitsVer="(-1.2; 0.2)"
RollAngle="-15"
ViewDir="(1.0; -0.05; 0)"
ViewPosOffset="(0; -0.1; 0.7)"
/>
</Cockpit>
</Camera>
set the limits (LimitsHor and LimitsVer) on how much you want it to be able to move
I did the same ...
So you have encounter the same bug ...(if you use the template tag) everything works locally but not from the steam workshop?