You mean the menu in Big Picture? I do not use it, but I tried once for Spintires and it didn't change anything. But since it was the first time I was opening it, I may not have done things right.
I have a Xbox controller plugged in, but I don't switch it on when I'm using the wheel/F710.
I give up.
I reset the controls, tried with and without X360 Controller Emulator, but nothing works. When I accelerate (with the F710 controller), the wheels go straight, even if I keep steering with the G27. And when I lift off, the wheels turn all of a sudden (the way they should).
And it's exactly the same with an original Xbox One controller.
The fact that it works for you puzzles me. There is almost no in-game settings for the controllers, except the key binding for the wheel. What did I miss?
Windows 10 and LGS 5.10.
Everybody is up-to-date and working fine with every other sim game.
When I set up the controls through Steam Input, the wheel is not detected anymore in the game (only the controller). I ticked the "Xbox" and "genreric" controller boxes (seprately and together) in the global Big Picture menu ; then I activated the specific controller settings for the game ; and finally I switched to the "global setting" (both for the Xbox and generic controller). Nothing works.
I disabled all joysticks and even the D-pad in Steam Input. I had also done that with X360 Controller Emulator.
Maybe if I could unassign the throttle/brake control under the "wheel" tab in Mudrunner? It doesn't seem possible.
The logitech g29 does NOT work for ps4 on spintire mudrunner. It will work for every other game, you can go to the controls menu and select the shifter/manual gearbox and it will say steering wheel detected but it will NOT work. No buttons will press nothing works at all. The game is not compatible.
i bought the game onPC, last sunday with a thrustmaster TMX force feedback. every thing working good. The feed back response was working perfect... i played all the day
here the issue, i try to play again yesterday, the steering and pedal are working good, but the force feedback does not work anymore... i try to restart my computer do the steering calibration, activate and desactivate the force feedback in the game.... nothing work... i thought it was the steering, so i lauch ATS and the feedback work great.. so i think there is a problem with the game or the config, can you help?