trailer_flatbed_2 (reverse light missing) PTS 7.3

The reverse light are not defined in the xml.

After change

<ReverseSignals>
<Light _template="ReverseSignal" ParentFrames="BoneCargo_1_cdt" Pos="(-3.405; 0.96; 0.921)" />
<Light _template="ReverseSignal" ParentFrames="BoneCargo_1_cdt" Pos="(-3.405; 0.96; -0.921)" />
<Flare _template="ReverseSignal" ParentFrames="BoneCargo_1_cdt" Pos="(-3.405; 0.96; 0.921)" />
<Flare _template="ReverseSignal" ParentFrames="BoneCargo_1_cdt" Pos="(-3.405; 0.96; -0.921)" />
<Flare _template="BlueStreak" Color="g(220; 220; 255) x 0.05" Dir="(-1; 0; 0)" ParentFrames="BoneCargo_1_cdt" Size="0.4" Pos="(-3.405; 0.96; 0.921)" />
<Flare _template="BlueStreak" Color="g(220; 220; 255) x 0.05" Dir="(-1; 0; 0)" ParentFrames="BoneCargo_1_cdt" Size="0.4" Pos="(-3.405; 0.96; -0.921)" />
<Light _template="ReverseSignal" ParentFrames="BoneCargo_1_cdt" Pos="(-3.409; 0.95; 0.775)" />
<Light _template="ReverseSignal" ParentFrames="BoneCargo_1_cdt" Pos="(-3.409; 0.95; -0.775)" />
<Flare _template="ReverseSignal" ParentFrames="BoneCargo_1_cdt" Pos="(-3.409; 0.95; 0.775)" />
<Flare _template="ReverseSignal" ParentFrames="BoneCargo_1_cdt" Pos="(-3.409; 0.95; -0.775)" />
<Flare _template="BlueStreak" Color="g(220; 220; 255) x 0.05" Dir="(-1; 0; 0)" ParentFrames="BoneCargo_1_cdt" Size="0.4" Pos="(-3.409; 0.95; 0.775)" />
<Flare _template="BlueStreak" Color="g(220; 220; 255) x 0.05" Dir="(-1; 0; 0)" ParentFrames="BoneCargo_1_cdt" Size="0.4" Pos="(-3.409; 0.95; -0.775)" />
</ReverseSignals>

Before
trailer flatebed reverse.jpg
After
trailer flatebed reverse fix.jpg

last edited by Raphael

Those look amazing! Hopefully your suggestion gets implemented in the upcoming patch.
Similar problem was with Fuel and Maint trailers in 5.x patches, but on PTS it's been fixed.