The locomotive is already underground!

After two failures, I found that pushing the locomotive slowly is much more stable than pulling it. But when I reached the trigger point, the truck was not connected to the locomotive, so the locomotive was pushed too far. The locomotive overlapped on the carriage. The moment the steel cable was connected, the task was completed, but the locomotive also began to shake wildly, and finally sank steadily into the ground. This whole process is a bit like death stranding

@blackjack01 Hello there! It's SnowRunner Support. Thanks for the report.
Could you please specify the name of the task?
If you face such issue again, please capture a short video with the locomotive shaking and sinking, it will help our team in the investigation.