Last Online
Recent Posts
posted in MudRunner read more

Windows 10 and LGS 5.10.
Everybody is up-to-date and working fine with every other sim game.

When I set up the controls through Steam Input, the wheel is not detected anymore in the game (only the controller). I ticked the "Xbox" and "genreric" controller boxes (seprately and together) in the global Big Picture menu ; then I activated the specific controller settings for the game ; and finally I switched to the "global setting" (both for the Xbox and generic controller). Nothing works.

I disabled all joysticks and even the D-pad in Steam Input. I had also done that with X360 Controller Emulator.

Maybe if I could unassign the throttle/brake control under the "wheel" tab in Mudrunner? It doesn't seem possible.

posted in MudRunner read more

I give up.

I reset the controls, tried with and without X360 Controller Emulator, but nothing works. When I accelerate (with the F710 controller), the wheels go straight, even if I keep steering with the G27. And when I lift off, the wheels turn all of a sudden (the way they should).

And it's exactly the same with an original Xbox One controller.

The fact that it works for you puzzles me. There is almost no in-game settings for the controllers, except the key binding for the wheel. What did I miss?

posted in MudRunner read more

You mean the menu in Big Picture? I do not use it, but I tried once for Spintires and it didn't change anything. But since it was the first time I was opening it, I may not have done things right.
I have a Xbox controller plugged in, but I don't switch it on when I'm using the wheel/F710.

posted in MudRunner read more

@lombra Thanks again for the feedback, I really appreciate!
So there is hope to make it work after all 😄 There must be something I didn't set up right. I'll take another look into the game to find out. I'll keep you updated if I find anything.

posted in MudRunner read more

I'm scratching my head... I'm feeling like the problem is on my side or maybe I'm doing something wrong. There are not many in-game settings to play with, so I don't know where to look. I'll try again.

posted in MudRunner read more

@lombra Thanks for the feedback! Is your controller listed along the G27 under the "wheel" tab in the control menu?

posted in MudRunner read more

@iyagovos I've been thinking about it and I need to ask: did the team try to operate the X1 controller and the wheel simultaneously? I mean: I'm sure both are detected, but can they accelerate with the controller and steer with the wheel at the same time?

I tried with a Xbox One controller and I get the same result.

When I connect the wheel and the controller (XInput mode), both are detected, but only the wheel is listed under the "wheel" tab in the control menu. If I set the controller to DirectInput mode, it appears in the "wheel" tab along with the wheel, but as I previously said, the DirectInput mode doesn't allow analogic response from the trigger.

It would be weird if all the the controllers worked except for the F710 and Xbox pad.

posted in MudRunner read more

@iyagovos 😢 I don't have any of those.
The F710 gamepad in Xinput mode usually works like a Xbox controller.

posted in MudRunner read more

@iyagovos Many thanks! !
In case they need to understand why I'm using such an unusual combo: the addition of the F710 gamepad on the G27 gives me hand-controlled throttle and brake through the analogic triggers (actuated by the shift pads behind the wheel). This is a prototype I engineered myself since I can't use my legs to press the pedals.
So enabling the use of a wheel and a gamepad simultaneously would open the game to gamers with physical limitations 🙂

posted in MudRunner read more

@iyagovos 😢 Noooooo ! I can't drive! How can I inform the developpers about this issue? The wheel/gamepad combo works fine with basically every other sim game I have (iRacing, Race 07, Raceroom, Eurotruck, Dirt 4 ...). So I know it's feasible. Thanks!

Looks like your connection to Focus Home Interactive - Official Forums was lost, please wait while we try to reconnect.